FlexLM Help

Guys thanks for the info, iam back to viewing flexlm apps, i did manage to solve my license problem and thanks iam now using the method for l_sg, at all my targets, however i found one target it doenst work for! maybe i maked a mistake, maybe not, anybody can view and see ?

i view the app:
*removed by request*

I got the following information:
Seed1: 38aa43fa
Seed2: 95845bd5
Vendor: Pxxxx

however, putting these into lmcryptgui, and resigning the license file, still results in -8 (Bad Auth)

Any ideas ?

Thanks.

[dirkmill]

@Peter[Pan]:
I just had a quick look at your target and it seems that your seeds are wrong!

I found this:
encseed[0]=6bxxxx58
encseed[1]=9cxxxx2e

You might want to recheck the byte-order of your calcseed-inputs

Dirk

gona view straight away! thnx

*edit*, yea it guess i was using Jobx04 ++, isnted of Jobx08++

anways i recorded the job, data and vendor name before, and after the call to n36buff

[BEFORE]
VENDOR: ASCII "Pxxxx"
Name: DATA                               JOB
0x00: 66 00 00 00                       04 00 00 00
0x04: 00 00 00 00                       15 BB F2 4E 
0x08: 00 00 00 00                       63 4C 08 B9 
0x0C: 00 00 00 00                       C0 D9 02 38
0x10: 00 00 00 00                       E5 B6 0F 2F
0x14: 00 00 00 00                       EA 9B 6F 06 
0x18: 00 00 00 00                       B0 7E 2A 4C 
0x1C: 00 00 00 00                       09 00 02 00

[AFTER]
VENDOR: ASCII "Pxxxx"
Name: DATA                               JOB
0x00: 66 00 00 00                       04 00 00 00 
0x04: 91 00 29 00                       74 35 99 6B 
0x08: 3F 99 86 2C                       02 C2 63 9C 
0x0C: 5E 3D 1C 00                       C0 D9 02 38 
0x10: 00 00 73 00                       E5 B6 0F 2F 
0x14: 00 00 00 00                       EA 9B 6F 06 
0x18: 00 00 00 00                       B0 7E 2A 4C 
0x1C: 00 00 00 00                       09 00 02 00

gives me:
data[0]: 00290091
data[1]: 2C86993F
Vendor: Pxxxx
job+0x08: 0x9C63C202
job+0x0c: 0x3802D9C0
job+0x10: 0x2F0FB6E5
XOR VAL: 0x2fc0d99c
Enc1: 0x2fe9d90d
Enc2: 0x034640a3

still doesnt match yours, maybe iam going wrong somewhere... :/

p.s thanks for the help its really appreciated

[dirkmill]

Ah, I see your mistake.
You're confusing job- and vendorcode-structure!
The vendor-struct is the block you marked JOB and vice-versa.

Your data is consistent with my encseeds

Dirk

omg *me dies* thanks man!, worked like a charm, what a silly mistake, my 1000 sorrys

JMI, if any of the previous posts need editing for something removing plz do! or just tell me and i will, sorry to waste peoples time

hehe another day, another problem

today i try to build lmcrypt for my own amusement, so i edit lm_code.h with:

(i got it from lmv8gen)

#define VENDOR_KEY1 0x6cfe8c94
#define VENDOR_KEY2 0x2d430502
#define VENDOR_KEY3 0xe64b1485
#define VENDOR_KEY4 0x04858ac0
#define VENDOR_KEY5 0x7a7420d1
#define CRO_KEY1 0x367306ef
#define CRO_KEY2 0x54c60c79
#define VENDOR_NAME "testabc"

now i go to C:\Program Files\FLEXlm\v9.2\i86_n3 in a dos promt and run:
"Build", i get the following:

Microsoft (R) Program Maintenance Utility   Version 6.00.9782.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
        lmrand1 -i ..\machind\lsvendor.c
        cl /c /nologo /c  /I..\machind /I. /MT  -I../h lmcode.c
lmcode.c
        LINK /nologo /NODEFAULTLIB /OPT:NOREF  /subsystem:CONSOLE lmnewgen.obj l
mcode.obj  lmgr.lib libcrvs.lib libsb.lib oldnames.lib kernel32.lib user32.lib n
etapi32.lib  advapi32.lib  gdi32.lib comdlg32.lib  comctl32.lib wsock32.lib libc
mt.lib /out:lmnewgen.exe
        if exist lm_new.c del lm_new.c
        lmnewgen.exe testabc -o lm_new.c
v8.1+ FLEXlm, non-CRO
lc_init failed: Invalid FLEXlm key data supplied
FLEXlm error:  -44,49
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
NMAKE : fatal error U1077: 'lmnewgen.exe' : return code '0x1'
Stop.

no matter how i change lm_code.h, i always get -44, anybody any ideas about this one ?, this is first time i use lmcrypt.c, i always have used lmcryptgui, thanks!

[tom324]

First thing to do is RTFM.

-44
LM_BADKEYDATA

"Invalid key data supplied."
Invalid FLEXnet Licensing key data was supplied to the lc_new_job() call. Some FLEXnet Licensing functions will be disabled.

Seems your VENDOR_KEYx and/or CRO_KEYn are not correct for vendor "testabc"

Tom