DumpOPT from Harmer Emulator 0.9b

[papi]

Please first anyone translate this and let discusse about it:

"������ܧ���� "DumpOpt"


���է�֧� 00 01 02 03 04 05 06 07 08 09 0A 0B
"DumpOpt"=hex:01, 44, 61 ,48, 00, 01, 01, 01, 01, 00, 78, 03

00 db 1, 44, 61, 48, 0 ;;const

05 db x
; 0 - MemoHASP-1, MemoHASP-4, TimeHASP-4
; 1 - HASP4 M1, HASP4 M4, HASP4 Time
06 db x
;1 - MemoHASP-1, MemoHASP-4, HASP4 M1, HASP4 M4
;3 �C TimeHASP
;5 - TimeHASP-4 or HASP4 Time
07 db x
;1 - MemoHASP-1, HASP4 M1
;4 - MemoHASP-4, HASP4 M4
;0 - other keys
08 db x,��
;00 00 �C ���֧� �٧ѧ�ڧ�� �� ��֧֧���, �էѧߧߧ��� �� ��֧֧���� �ߧ� �٧ѧ�ڧ���ӧѧߧ�
;00 01 �C ���� ����֧է֧ݧ֧ߧ�
;00 02�C ���� ����֧է֧ݧ֧ߧ�
;01 00 �C ���ѧ�ڧ�� �ҧ֧� ��ڧ���ӧѧߧڧ�. �էѧߧߧ��� �� ��֧֧���� �ߧ� �٧ѧ�ڧ���ӧѧߧ�
;01 01 - ���ѧ�ڧ�� c ��ڧ���ӧѧߧڧ֧�. �էѧߧߧ��� �� ��֧֧���� �٧ѧ�ڧ���ӧѧߧ�
;01 02 - ���ѧߧߧ��� �� ��֧֧���� �ҧ֧� ��ڧ���ӧѧߧڧ�, �ߧ� ���� �٧ѧ�ڧ�� �ҧ�է֧� ��ڧ���ӧѧ��
�� �ڧ٧ާ֧ߧڧ� �٧ߧѧ�֧ߧڧ� �ߧ� 01
0A dw 378h �C������ �� �ܧ�����ާ� HASP ���էܧݧ��֧�"

Hoppe anyone help...

Structure "DumpOpt"


Address 00 01 02 03 04 05 06 07 08 09 0A 0B
"DumpOpt"=hex:01, 44, 61 ,48, 00, 01, 01, 01, 01, 00, 78, 03

00 db 1, 44, 61, 48, 0 ;;const

05 db x
; 0 - MemoHASP-1, MemoHASP-4, TimeHASP-4
; 1 - HASP4 M1, HASP4 M4, HASP4 Time
06 db x
;1 - MemoHASP-1, MemoHASP-4, HASP4 M1, HASP4 M4
;3 �C TimeHASP
;5 - TimeHASP-4 or HASP4 Time
07 db x
;1 - MemoHASP-1, HASP4 M1
;4 - MemoHASP-4, HASP4 M4
;0 - other keys
08 db x,��
;00 00 �C Without writing to registry, data in registry is not encrypted
;00 01 �C Undefined
;00 02 �C Undedined
;01 00 �C Writing w/o encryption. data in registry is not encrypted
;01 01 - Writing w/ encryption. data in registry is encrypted
;01 02 - Data in registry is not encrypted, but it will be encrypted during writing
and the value will be changed to 01
0A dw 378h �C HASP is connected to this port

[souz]

"DumpOpt" Structure


Offset: 00 01 02 03 04 05 06 07 08 09 0A 0B
"DumpOpt"=hex:01, 44, 61 ,48, 00, 01, 01, 01, 01, 00, 78, 03

00 db 1, 44, 61, 48, 0 ;;const

05 db x
; 0 - MemoHASP-1, MemoHASP-4, TimeHASP-4
; 1 - HASP4 M1, HASP4 M4, HASP4 Time
06 db x
;1 - MemoHASP-1, MemoHASP-4, HASP4 M1, HASP4 M4
;3 �C TimeHASP
;5 - TimeHASP-4 or HASP4 Time
07 db x
;1 - MemoHASP-1, HASP4 M1
;4 - MemoHASP-4, HASP4 M4
;0 - other keys
08 db x,��

;00 00 �C Without Writing data support , no crypting
;00 01 �C not defined
;00 02�C not defined
;01 00 �C without crypting, data in registry not crypted
;01 01 - support write with crypting, crypted data in registry
;01 02 - data in registry without crypting , but when writing will be crypt
and will change value to 01.
0A dw 378h �Cport - LPT

[papi]

Thank you Souz

in other emulator need:

"SN"=dword:xxxxxxxx
"Type"=dword:xxxxxxxx
"Memory"=dword:xxxxxxx

in Harmer emul 0.9b is not need this one is this are inside the DumpOpt or where is diferent between other emul.
Please explain.......

Does anyone know how to calculate the EDStruct in Harmer emul 0.9b?
Best Regards.

[Asus]

It likes BrStudio/Glasha HASP-Emulator.

[papi]

To Asus
Thanks
Wich dump tool you prefer to dump hasp dongle?

Originally Posted by Asus

It likes BrStudio/Glasha HASP-Emulator.

Dear Asus:
I knew it.But the EDS is very different from Glasha,would you mind tell me how to construct the EDS either here or on PM.
Best Regards.

[papi]

It will be very good to tell us or even for me that I am a beginner on Hasp emulations to know the construct of EDS how it calculate.
Help us advenced guy on the forum.

[learner38]

i think the best dumper is UCL one which use (EXE+Dll)
and galasha one not bad..and working in many cases
thanks

[learner38]

a small explain in the attached photo:
time hasp "DumpOpt"=hex:01,44,61,48,00,01,05,04,01,02,78,03
net hasp "DumpOpt"=hex:01,44,61,48,00,01,01,01,01,00,78,03

[papi]

Did any one have dump tool from HarmEr because have problem with UCL and Glashas dump tool the DATA and EDS are not the same and emulator 0.9b not work on some cases.
Thanks...